13. April 2024 · Comments Off · Categories: epoxy · Tags: , , , , , , , , ,
Epoxy Resin Pond Paint. For waterproofing & damp proofing ponds & water features

Epoxy Resin Pond Paint. For waterproofing & damp proofing ponds & water features
Epoxy Resin Pond Paint in 1L, 2.5L and 5L. ASK POND PAINT is a water based epoxy coating designed to give easy and safe application. It is applied in the same manner as ordinary emulsion paint with the added benefit of application in damp conditions. Once dried ASK POND PAINT leaves a tough, non toxic, waterproof, easy to clean surface coating. Price includes VAT at 20%. For all concrete pond surfaces and aquatic features. A general waterproofing coating. For application to damp surfaces where other paints cannot adhere. Tough cure in 4 hours. Hard dry in 12 hours. Maximum cure 8 days. Once cured can withstand pressure washing, steam cleaning and washing with sterilizing liquids. The lower the temperature the longer the cure. Coverage is approximately 7 square metres per 1 litre. This may be reduced on rougher more porous surfaces. Store in original containers. A shelf life of 12 months can be expected. If using spray equipment, rinse thoroughly with cold water frequently to avoid build up of cured paint. Brushes and rollers should be washed in cold water and mild detergent. Two part product which when mixed gives 5 litres, 2.5 litres and 1 litre. Clean, easy to use, recyclable packaging. Colours – Grey, Blue, Stone, Green, Dark Blue, Black, Clear, White, Light Blue. Store in a sealed container between +5°C and +30°C. Protect from frost and direct sunlight. Preparation, Mixing and Application. Will coat over most other finishes but best results are achieved when surfaces are free and clean from other coatings. Any greasy film should be removed prior to application to ensure a sound key. Voids, holes and gaps must be carefully filled. Mixing of ASK Paint couldn’t be easier – simply remove the ring which holds the two tins together – Add pack B into pack A (the larger tin) stirring continuously. Stir well to ensure that the hardener (pack B) is completely dispersed into pack A. ASK POND PAINT is now ready to be applied immediately. A two coat system is sufficient but where the surface is very porous a third coat may be required. Where being used as a waterproof membrane a three coat application is recommended to ensure complete coverage. The second coat should be applied as soon as the first coat is touch dry to ensure a good key. As easy to use as ordinary emulsion paint, apply using a brush, roller or spray. 2nd coat should be applied as soon as 1st coat is touch dry. Non Toxic, tough and durable. Technical information and advice. For further information and advice please contact ASK Coatings technical department and the Safety data sheet available on request. ASK POND PAINT is a very safe product to use however it is recommended that all skin and eye contact be avoided and that any areas of skin contact be washed immediately with soap and water. It is advisable to wear gloves. If this occurs seek medical advice immediately. Keep out of reach of children. All product images and colour representations used are for illustrative purposes. For further information please contact our friendly team. Search for Ask Coatings online and then contact our friendly customer services team.
Epoxy Resin Pond Paint. For waterproofing & damp proofing ponds & water features
01. August 2023 · Comments Off · Categories: reduced · Tags: , , , , , , , ,
REDUCED Rustoleum Noxyde Water Based Elastomeric Metal Coating 20KG
REDUCED Rustoleum Noxyde Water Based Elastomeric Metal Coating 20KG

REDUCED Rustoleum Noxyde Water Based Elastomeric Metal Coating 20KG
Discounted due to old stock, the paint is new and unused even if the tin itself. C5 Corrosion Class – Very High Protection!! Single Pack and Easy to Use. Elastomeric – Up to 200% Elasticity. Single pack water-based elastomeric coating based on a modified acrylic binder with unequalled corrosion protection. Not the product you need? On iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc. As rust prevention or waterproofing. For outside and inside use. Diluted with 25% water as an adhesion primer coat on slightly or non porous substrates such as glass, smooth bricks and concrete, ceramics, tiles, etc. Please refer to the product Data Sheet for more uses. To request a copy. Further Details and Technical Data. Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning max. 200 Bars in combination with appropriate detergents. The substrate has to be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressure water jetting min. After jetting, the substrate has to be dust free. On new galvanised surfaces, new zinc, aluminium, stainless steel, apply first a coat of Pegalink. On ferrous substrates, apply Noxyde in red or grey as the first coat. In all instances apply contrasting Noxyde colours for subsequent layers. Conditions: Temperature between 8 and 55°C / Air humidity max. The substrate temperature must be at least 5°C above dewpoint. Brushing: Undiluted as a rust preventive paint. Diluted with approximately 25% volume water as an adhesion primer (consumption about 100 g/m²). Roller: Undiluted as a rust preventive paint. Nozzle: 13 – 17 / Pressure: min. Nozzle and pressure can vary depending on the type of substrate, equipment and the experience of the applicator. Brush/roller: 200 – 300 g/m²/coat. Airless: 300 – 500 g/m²/coat. Total consumption for optimal rust preventive protection: 800 g/m² (in 2 coats) = 350 µm dry film thickness. Do not apply in full sun or too hot conditions, to avoid a decreased flow. The product can remain a little sticky if it is used on newPlastisol cladding. Touch dry: 1,5 hours. Dry to handle: 3 hours. Dry to recoat: 24 hours. Fully cured: 2 weeks. Density (g/cm³): 1,2 – 1,3. Gloss level at 60º: 20%. Corrosion Class: C5 very high protection. Solids Content in weight: 62 % ± 3 %. Solids content in volume: 55 % ± 3 %.
REDUCED Rustoleum Noxyde Water Based Elastomeric Metal Coating 20KG
10. December 2021 · Comments Off · Categories: tierra · Tags: , , , , , , , , ,