Epoxy Resin Pond Paint in 1L, 2.5L and 5L. ASK POND PAINT is a water based epoxy coating designed to give easy and safe application. It is applied in the same manner as ordinary emulsion paint with the added benefit of application in damp conditions. Once dried ASK POND PAINT leaves a tough, non toxic, waterproof, easy to clean surface coating. Price includes VAT at 20%. For all concrete pond surfaces and aquatic features. A general waterproofing coating. For application to damp surfaces where other paints cannot adhere. Tough cure in 4 hours. Hard dry in 12 hours. Maximum cure 8 days. Once cured can withstand pressure washing, steam cleaning and washing with sterilizing liquids. The lower the temperature the longer the cure. Coverage is approximately 7 square metres per 1 litre. This may be reduced on rougher more porous surfaces. Store in original containers. A shelf life of 12 months can be expected. If using spray equipment, rinse thoroughly with cold water frequently to avoid build up of cured paint. Brushes and rollers should be washed in cold water and mild detergent. Two part product which when mixed gives 5 litres, 2.5 litres and 1 litre. Clean, easy to use, recyclable packaging. Colours – Grey, Blue, Stone, Green, Dark Blue, Black, Clear, White, Light Blue. Store in a sealed container between +5°C and +30°C. Protect from frost and direct sunlight. Preparation, Mixing and Application. Will coat over most other finishes but best results are achieved when surfaces are free and clean from other coatings. Any greasy film should be removed prior to application to ensure a sound key. Voids, holes and gaps must be carefully filled. Mixing of ASK Paint couldn’t be easier – simply remove the ring which holds the two tins together – Add pack B into pack A (the larger tin) stirring continuously. Stir well to ensure that the hardener (pack B) is completely dispersed into pack A. ASK POND PAINT is now ready to be applied immediately. A two coat system is sufficient but where the surface is very porous a third coat may be required. Where being used as a waterproof membrane a three coat application is recommended to ensure complete coverage. The second coat should be applied as soon as the first coat is touch dry to ensure a good key. As easy to use as ordinary emulsion paint, apply using a brush, roller or spray. 2nd coat should be applied as soon as 1st coat is touch dry. Non Toxic, tough and durable. Technical information and advice. For further information and advice please contact ASK Coatings technical department and the Safety data sheet available on request. ASK POND PAINT is a very safe product to use however it is recommended that all skin and eye contact be avoided and that any areas of skin contact be washed immediately with soap and water. It is advisable to wear gloves. If this occurs seek medical advice immediately. Keep out of reach of children. All product images and colour representations used are for illustrative purposes. For further information please contact our friendly team. Search for Ask Coatings online and then contact our friendly customer services team.
Epoxy Resin Pond Paint in 1L, 2.5L and 5L. ASK POND PAINT is a water based epoxy coating designed to give easy and safe application. It is applied in the same manner as ordinary emulsion paint with the added benefit of application in damp conditions. Once dried ASK POND PAINT leaves a tough, non toxic, waterproof, easy to clean surface coating. Price includes VAT at 20%. For all concrete pond surfaces and aquatic features. A general waterproofing coating. For application to damp surfaces where other paints cannot adhere. Tough cure in 4 hours. Hard dry in 12 hours. Maximum cure 8 days. Once cured can withstand pressure washing, steam cleaning and washing with sterilizing liquids. The lower the temperature the longer the cure. Coverage is approximately 7 square metres per 1 litre. This may be reduced on rougher more porous surfaces. Store in original containers. A shelf life of 12 months can be expected. If using spray equipment, rinse thoroughly with cold water frequently to avoid build up of cured paint. Brushes and rollers should be washed in cold water and mild detergent. Two part product which when mixed gives 5 litres, 2.5 litres and 1 litre. Clean, easy to use, recyclable packaging. Colours – Grey, Blue, Stone, Green, Dark Blue, Black, Clear, White, Light Blue. Store in a sealed container between +5°C and +30°C. Protect from frost and direct sunlight. Preparation, Mixing and Application. Will coat over most other finishes but best results are achieved when surfaces are free and clean from other coatings. Any greasy film should be removed prior to application to ensure a sound key. Voids, holes and gaps must be carefully filled. Mixing of ASK Paint couldn’t be easier – simply remove the ring which holds the two tins together – Add pack B into pack A (the larger tin) stirring continuously. Stir well to ensure that the hardener (pack B) is completely dispersed into pack A. ASK POND PAINT is now ready to be applied immediately. A two coat system is sufficient but where the surface is very porous a third coat may be required. Where being used as a waterproof membrane a three coat application is recommended to ensure complete coverage. The second coat should be applied as soon as the first coat is touch dry to ensure a good key. As easy to use as ordinary emulsion paint, apply using a brush, roller or spray. 2nd coat should be applied as soon as 1st coat is touch dry. Non Toxic, tough and durable. Technical information and advice. For further information and advice please contact ASK Coatings technical department and the Safety data sheet available on request. ASK POND PAINT is a very safe product to use however it is recommended that all skin and eye contact be avoided and that any areas of skin contact be washed immediately with soap and water. It is advisable to wear gloves. If this occurs seek medical advice immediately. Keep out of reach of children. All product images and colour representations used are for illustrative purposes. For further information please contact our friendly team. Search for Ask Coatings online and then contact our friendly customer services team.