Landlords’ offers premium quality paint to stop future damp problems including mould, discolouration, staining and blistering. An ideal product to paint walls that require long-lasting protection from continuous condensation. Suitable for areas such as kitchen, bathroom. Anti Damp paint seals ceilings and walls to block damp and stains from re-appearing. Suitable for areas that tends to damp including areas around windows frames and exterior facing walls. For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting. Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by brush, apply evenly following the grain of the wood. If rolling, use a short nap mohair roller. To create a distressed look, apply two coats in contrasting colours. Allow to dry and then lightly abrade with moistened sand paper or stainless steel scoring pad – abrade with the grain of the wood. Up to 12m2 per litre. Coverage may vary depending upon method and rate of application and porosity of surface. Touch dry in 1 hour. We recommend applying two coats if used on bare surface after 2hours. Fully hardens after 24 hours. Once paint is thoroughly dry, use moistened sand paper or stainless steel scoring pad to distress furniture. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings.